HP StorageWorks XP Remote Web Console Software - Manual (Page 91)

Figure 27 MCU & RCU Display on the RCU Operation Window showing CU List
Table 33 MCU & RCU Display on the RCU Operation Window showing CU List
Description Item
CU number which is selected on the tree view. CU:
MCU or RCU. MCU is displayed when the HP disk array
that you are accessing is used as the RCU of the pair. Type:
Serial number and SSID of the other CU of the pair. LDKC
number (with two digits) is also displayed next to the S/N. S/N and SSID
CU number of the other CU of the pair. Paired CU
Path channel type (fibre) between the other CU of the pair.
This column is blank when the connected CU is an MCU. M-R Path
Normal indicates no path failure to the RCU. Failed
indicates that a failure occurs in all paths to the RCUs.
Warning indicates that a failed path to the RCU exists. This
column is blank when the connected CU is an MCU. Status
Number of paths (blank when the connected CU is an
MCU). Num. of Path
Double-click the selected CU to display the RCU information for that CU (see “MCU & RCU Display
on the RCU Operation Window showing RCU List” (page 92) ). The Controller ID, model name,
RCU serial number, LDKC number, and CU number are displayed next to the RCU icon. You can
also double-click an RCU to display the SSID and path information for that RCU in the list (also
shown in
“MCU & RCU Display on the RCU Operation Window showing RCU List” (page 92) ).
RCU Operation Window 91