HP StorageWorks XP Remote Web Console Software - Manual (Page 153)

3. In the list, select the pair(s) for which you want to change the pair option. When a port is
selected in the tree, the pair(s) can be selected from the current Volume List.
Select either TrueCopy for Mainframe Sync pairs or Async pairs (not both). Use the Display
Filter as needed to display the desired pairs (for example, select Async only).
4. Right-click, and click Change Pair Option to open the Change Pair Option dialog box (see
“Change Pair Option Dialog Box (Asynchronous)” (page 152) ).
5. On the Change Pair Option dialog box, select the desired option(s) for the selected pair(s),
and click Set to close the Change Pair Option dialog box. The preview list displays the
requested change pair option operation(s).
6. Verify the requested operation(s) in the list.
To change one or more operations, select the operation(s) from the preview list, right-click,
and click Modify. To remove one or more operations, select the operation(s), right-click, and
click Delete. To cancel all operations, select all the operations in the preview list, right-click,
and click the Delete command or click Cancel.
7. To perform the operation(s), click Apply.
If one or more operation(s) did not start normally, the preview list displays only the operation(s)
that did not start normally. An error code is displayed on the Error Code column in the preview
list. To display an error message, select one LU, right-click, and click Error Detail. After you
see the error message, click OK to close the error message.
8. On the Pair Operation window, verify that the change pair option operation(s) completed
successfully.
If an error occurs after you click Apply, you can display the error message by right-clicking on the
operation and clicking the Error Detail command.
Viewing TrueCopy for Mainframe Pair Status
The Detailed Information dialog box (see “Detailed Information Dialog Box ” (page 154) ) displays
the detailed status of the selected pair. To open the Detailed Information dialog box, click Pair
Operation tab, select a CU grouping or CU from the tree, select the desired pair, right-click, and
then click Detailed Information command.
The CQUERY TSO command can also be used to display pair status for TrueCopy for Mainframe
Sync and Async pairs at the MCU and RCU.
Viewing TrueCopy for Mainframe Pair Status 153