Viewing rcu status – HP StorageWorks XP Remote Web Console Software User Manual
Page 115
1.
Click the RCU Operation tab, and click the MCU&RCU display button.
2.
Select and double-click the desired MCU CU in the tree, and select the RCU to which you
want to add SSID(s). Alternatively, select the RCU in the list, right-click and click Edit SSID(s)
& Path(s). All SSIDs for the selected RCU are listed.
3.
Right-click the SSID and path list, and then click Add SSID to open the Add SSID dialog box.
4.
On the Add SSID dialog box, enter the new SSID(s).
5.
Click Set to close the Add SSID dialog box. The preview list now displays the requested add
SSID operation(s).
6.
Verify the requested operation(s) displayed in the preview list.
To change the add SSID operation, select the operation, right-click, and click Modify. To
remove the operation, select the operation from the preview list, right-click, and click Delete.
To cancel all operations, select all the operations in the preview list, right-click, and click the
Delete command, or click Cancel.
7.
To start the operation(s), click Apply.
Before deleting an SSID, make sure that all affected TrueCopy for Mainframe pairs (pairs having
R-VOLs in the RCU SSID to be deleted) have already been released. If all affected pairs have not
been released, the MCU will reject the delete SSID operation to prevent accidental release of
TrueCopy for Mainframe pairs.
The Delete SSID command allows you to delete an SSID from an existing RCU. To delete one or
more SSIDs from an existing RCU:
1.
Click the RCU Operation tab, and click the MCU&RCU display button.
2.
Select and double-click the desired MCU CU in the tree, then select the RCU for which you
want to delete the SSID(s). Alternatively, select the RCU from the list, right-click, and click Edit
SSID(s) & Paths. All SSIDs for the selected RCU are listed.
3.
Right-click the SSID that you want to delete, and then click Delete SSID. When the confirmation
message appears, click OK to delete SSID, or click Cancel to cancel your request to delete
SSID. The preview list now displays the requested delete SSID operation(s). Delete is displayed
on the rightmost column of the selected SSID in the path/SSID list.
4.
Verify the requested operation(s) displayed in the preview list.
To remove an operation, select the operation from the preview list, right-click, and click Delete.
To cancel all operations, select all the operations in the preview list, right-click, and click the
Delete command, or click Cancel.
5.
To start the operation(s), click Apply. To cancel the operation and return the lists to their original
display, click Cancel.
Viewing RCU Status
The RCU Status dialog box (see
“RCU Status Dialog Box” (page 116)
) displays the detailed status
information for the selected RCU.
“Logical Path Status” (page 117)
describes the path status
descriptions.
To view the detailed RCU status information:
1.
Click the RCU Operation tab, and click the MCU&RCU display button.
2.
Select the RCU for which you want to display the status in the list. You can only view status
for one RCU at a time.
3.
Right-click the RCU, and click RCU Status to open the RCU Status dialog box.
RCU Operations
115