HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 123)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 123
5 - M
AN
AGING
HP EFS
W
A
N
A
C
C
EL
ER
ATO
R
M
ANA
GER
Setting the Date
and Time
You set the date, time, and time zone for the HP EFS WAN Accelerator Manager in the
Set Date & Time - Set Clock page.
To set the date and
time 1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Date & Time in the left menu to display the Set Date & Time - Set Clock
page.
Figure 5-13. Setup Manager: Set Date & Time - Set Clock Page
3. Use the following controls to set the HP EFS WAN Accelerator Manager clock.
4. Click Apply to apply the setting to the running configuration.
When you apply page settings, the values are applied to the running configuration
but not saved permanently. The Save Configuration icon displays a flashing
orange arrow to remind you to save your configuration.
5. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Setting NTP
Servers
You set NTP servers for the HP EFS WAN Accelerator Manager in the Date & Time -
NTP Servers page.
Enabling this feature is optional. NTP synchronization is not enabled by default.
Time synchronization is not required for HP EFS WAN Accelerator Manager
operation. Enabling NTP time synchronization ensures your reports and logs are
synchronized.
Control Description
Set Time Using NTP Time
Synchronization Check this box to enable NTP time synchronization. NTP synchronization enables the
time stamps for logs to match those of other computers that use NTP time
synchronization. This option is not required for proper system operation.
Set Time Manually Date. Type the current date. Use the following format: YYYY/MM/DD.
Time. Type the current time. Use the following format: HH:MM:SS.
Time Zone Select your time zone from the drop-down list. The default is GMT (Greenwich Mean
Time).