HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 154)

154 6 - D ISPLAYING AND C USTOMIZING HP EFS WAN A CCELERATOR M ANAGER R EPORTS
Displaying the
Alarm Status
Report
You display the HP EFS WAN Accelerator Manager Alarm Status report in the Alarm
Status page.
The Alarm Status report contains the following table of statistics that summarize traffic
activity by application.
What This Report
Tells You The Alarm Status report answers the following question:
‹ What is the current status of the HP EFS WAN Accelerator Manager?
To display the Alarm
Status report 1. Click the Reports tab to display the Reports menu.
2. Under HP EFS WAN Accelerator Manager in the left menu, click Alarm Status to
display the Alarm Status page.
Figure 6-9. Reports: Alarm Status Page
TIP: To print your report, click the Printer icon in the upper right corner of the page.
Displaying the
CPU Utilization
Report
You display the HP EFS WAN Accelerator Manager CPU Utilization report in the
CPU Utilization page.
Alarm Description
Central Processing
Unit (CPU)
Utilization Whether the system has reached the CPU threshold for any of the HP
EFS WAN Accelerators. If the system has reached the CPU
threshold, check your settings.
Memory Paging Whether the system has reached the memory paging threshold. If
100 pages are swapped approximately every two hours the HP EFS
WAN Accelerator Manager is functioning properly. If thousands of
pages are swapped every few minutes, then reboot the HP EFS WAN
Accelerator Manager. If rebooting does not solve the problem,
contact HP technical support.
System Disk Full Whether the data store has reached maximum disk capacity.