HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 99)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 99
4 - M
ANAG
ING
R
EM
O
T
E
HP
EF
S W
A
N A
CC
ELE
RAT
OR
S
Managing Remote Appliances
This section describes how to start, stop, restart, reboot, and shut down the HP EFS
WAN Accelerator service on remote HP EFS WAN Accelerators.
This section includes the following topics:
‹ “Starting, Stopping, and Restarting the HP EFS WAN Accelerator Service,” next
‹ “Rebooting Appliances” on page 100
‹ “Shutting Down Appliances” on page 101
NOTE: When you stop the HP EFS WAN Accelerator service, the appliance appears in reports
with the status critical. The status appears OK once the appliance is back online.
Starting,
Stopping, and
Restarting the
HP EFS WAN
Accelerator
Service
You start, stop, and restart the HP EFS WAN Accelerator service on remote HP EFS
WAN Accelerators in the Start/Stop Services page.
The HP EFS WAN Accelerator service is a daemon that executes in the background,
performing operations when required. Many of the HP EFS WAN Accelerator service
commands are initiated at startup. It is important to restart the HP EFS WAN
Accelerator service when you have made changes to your configuration.
WARNING: Restarting the appliance disrupts existing network connections that are proxied
through the appliance.
To start, stop, or
restart the HP EFS
WAN Accelerator
service 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Start/Stop Service in the left menu to display the Start/Stop Services page.
Figure 4-3. Setup Appliances: Start/Stop Services Page