HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 144)

144 6 - D ISPLAYING AND C USTOMIZING HP EFS WAN A CCELERATOR M ANAGER R EPORTS
To display the
Throughput report 1. Click the Reports tab to display the Reports menu.
2. Under Remote Appliances in the left menu, click Throughput to display the
Remote Appliances - Throughput page.
Figure 6-2. .Reports: Remote Appliances - Throughput Page
3. Use the controls to customize the report, as described in the following table.
Displaying the
Connection
History Report
You display and customize the Connection History report in the Connection History
page.
Control Description
Period Select Last Hour, Last Day, Last Week, or Last Month from the Period drop-down
list.
Traffic Select Bi-directional, WAN-to-LAN, or LAN-to-WAN from the drop-down list.
Application Select FTP, HTTP, CIFS:NetBIOS, CIFS:TCP, or MAPI from the drop-down list. The
default value is All.
Appliances The default is to include all appliances. To set a custom group, click All and use the
dialog box to select an appliance, a group, or a custom selection of appliances to include
in the report.
Refresh Set a rate to refresh the report display:
• To refresh your report every 15 seconds, click 15s.
• To refresh your report every 30 seconds, click 30s.
• To turn off refresh, click off.
Note: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.