HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 190)

190 A - HP EFS WAN A CCELERATOR M ANAGER C OMMAND -L INE I NTERFACE
Syntax show email
Parameters None
Example minna # show email
Mail hub:
Domain: example.com (default)
Event emails
Enabled: yes
No recipients configured.
Failure emails
Enabled: yes
No recipients configured.
Autosupport emails
Enabled: yes
recipient:[email protected]
Mail hub:autosupport.example.com
SNMP Commands
This section describes the Simple Network Mail Protocol (SNMP) commands. It
contains the following commands:
‹ “show snmp,” next
‹ “snmp-server community” on page 190
‹ “snmp-server contact” on page 191
‹ “snmp-server enable” on page 191
‹ “snmp-server host” on page 191
‹ “snmp-server location” on page 192
show snmp
Description Displays current Simple Network Management Protocol (SNMP) server settings.
Syntax show snmp
Parameters None
Example minna # show snmp
SNMP enabled: yes
System location:
System contact:
Read-only community: public
Traps enabled: yes
No trap sinks configured.
snmp-server community
Description Configures the community string required to make SNMP queries. The no command
option disables an SNMP community string to make SNMP queries.