HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 177)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 177
A - HP
EFS W
A
N
A
C
C
EL
ER
ATO
R
M
ANA
GER
show interface
Description Displays interface settings for specified interface or all interface settings if one is not
specified.
Syntax interface {<ifname>} [configured | brief]
Parameters
Example minna (config) # show interface lan
Interface lan state
Up: no
IP address:
Netmask:
Speed: UNKNOWN
Duplex: UNKNOWN
Interface type: ethernet
MTU: 1500
HW address: 00:30:64:02:3D:F9
RX bytes: 0
RX packets: 0
RX mcast packets: 0
RX discards: 0
RX errors: 0
RX overruns: 0|
RX frame: 0
TX bytes: 0
TX packets: 0
TX discards: 0
TX errors: 0
TX overruns: 0
TX carrier: 0
TX collisions: 0
Name Resolution Commands
The following section describes name resolution commands for the HP EFS WAN
Accelerator Manager. It contains the following commands:
‹ “hostname,” next
‹ “ip name-server” on page 178
‹ “ip domain-list” on page 178
‹ “ip host” on page 178
‹ “show hosts” on page 179
<ifname> Specifies the interface name: aux, lan, wan, primary, in-path.
configured | brief Displays interface settings.
brief Displays the abbreviated runtime state, with the interface statistics
excluded.