HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 148)

148 6 - D ISPLAYING AND C USTOMIZING HP EFS WAN A CCELERATOR M ANAGER R EPORTS
To create Connection
Counts report 1. Click the Reports tab to display the Reports menu.
2. Under Remote Appliances in the left menu, click Connection Counts to display the
Remote Appliances - Connection Counts page.
Figure 6-4. Reports: Remote Appliances - Connection Counts Page
3. Use the controls to customize the report, as described in the following table.
Downloading
Remote
Appliance Logs
You download remote appliance logs in the Download Logs page.
Control Description
Appliances The default is to include all appliances. To set a custom group, click all and use the
dialog box to select an appliance, a group, or a custom selection of appliances to include
in the report.
Refresh Set a rate to refresh the report display:
• To refresh your report every 30 seconds, click 30s.
• To turn off refresh, click off.
Note: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.