HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 76)

76 3 - S ETTING U P R EMOTE HP EFS WAN A CCELERATORS
4. Use the controls to modify the appliance registration settings, as described in the
following table.
5. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Completing the
Appliance
Configuration
This section describes how to complete appliance-specific settings for remote
appliances. It includes the following topics:
‹ “Setting the Host Name,” next
‹ “Setting the Primary Interface” on page 78
‹ “Setting In-Path Interfaces” on page 79
‹ “Setting Auxiliary Interfaces” on page 83
‹ “Setting Static Network Routes” on page 84
‹ “Setting Static In-Path Network Routes” on page 85
‹ “Setting the DNS” on page 87
‹ “Setting Host Names and IP Addresses” on page 88
‹ “Setting Authentication and Encryption” on page 89
‹ “Setting Proxies” on page 92
Setting the Host
Name You change the host name for a remote HP EFS WAN Accelerator in the Hostname
page.
Control Description
Local Configuration Hostname/IP Address. To modify the host name or IP address, type a new value in the
text box.
Auto-config. Select Defer to Group’s Setting, Enable, or Disable from the drop-down
list to set auto-configuration preferences.
Backup. Select Defer to Group’s Setting, Enable, or Disable from the drop-down list
to set backup preferences.
Config Pushes. Select Defer to Group’s Setting, Enable, or Disable from the drop-
down list to set configuration push preferences.
Comment. Type a description if you want the description to appear in the appliance list.
For example, you might want to describe any overrides you have applied.
Authentication Username. To modify the user name of the remote administrator user, type a new value
in the text box. This is the same user name that is required when logging into the
appliance directly. Typically, this user name is admin.
Password. To modify the password for the remote user, type a new value in the text box.
This is the same password that is required when logging into the appliance directly.
Groups. Displays the groups to which the appliance belongs.
Appliance Profile Expand the Appliance Profile list to display the profiles associated with the appliance.
Appliance Specific Commands Expand the Appliance Specific Commands list to display any CLI commands that are in
addition to common profile commands.