HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 42)

42 3 - S ETTING U P R EMOTE HP EFS WAN A CCELERATORS
Setting In-Path
Rules
You set in-path configuration rules for a common profile in the Profile - In-Path Rules
page.
An in-path rule defines the policies for intercepting traffic for optimization.
To set in-path rules 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Common Profiles in the left menu to expand the Common Profiles menu.
3. Click In-Path Rules in the left menu to display the Profile - In-Path Rules page.
Figure 3-3. Setup Appliances: Profile - In-Path Rules Page
4. Use the controls to set in-path rules for a profile, as described in the following
table.
Control Description
Settings will be applied to profile Select the name of the profile you want to configure from the drop-down list.