2 video-option, Bnc-cable, Dat-recorder – ARRI LOCPRO 35 User Manual
Page 12: Cable, Mirror, Mirror setting knob, Perfotape player, Setting knob, Slide switch, Video
Advertising
12
5.2 Video-Option
The LOCPRO 35 must be switched off before
connecting it to an interface cable or DAT-
recorder or perfotape player.
1) Connect the monitor via BNC-or Y/C-cable to the
appropriate socket
➪
photo
on the LOCPRO 35.
2) Set mirror with selection knob
➪
photo
to the TV
symbol.
3) Shift slide switch on lamp cover
➪
photo
to the TV
symbol.
Note:
Video ”on/off” is only possible when the
Master Control Knob is in the ”0” position, i.e.
when the film is not being transported.
4) Switch on TV monitor.
5) Adjust monitor for optimum image quality.
Initial Operation
BNC-socket
setting knob
Y/C-socket
slide switch
Advertising