50 hz/60 hz version, Frame rates, Standard 50 hz version – ARRI LOCPRO 35 User Manual
Page 23: Standard 60 hz version, Highspeed shuttle, Mode, Mode key, Shuttle, Speed, Functions
23
6.1.3 Frame Rate
The frame rate can only be set after the mains has been
switched on and the film channel is closed. Ensure that
the Master Control Knob
➪
photo
is reset to ”0” each
time after the film channel has closed.
1) Select the requested frame rate (visible on the display)
by turning the Master Control Knob
➪
photo
. The
film now runs at the selected speed.
The following frame rates can be chosen for forward and
reverse operation:
• 50 Hz Version
1.56-3.12-6.25-12.5-25-50 fps (standard)
Highspeed shuttle 200 fps
48-24-30 fps can be selected directly via ”Mode” Key
➪
photo
(see chapter 6.6).
• 60 Hz Version
1.87-3.75-7.5-15-30-60- fps (standard)
Highspeed shuttle 200 fps
48-24-25 fps can be selected directly via ”Mode” Key
➪
photo
.
Functions
master control knob
“Mode“- key