ARRI LOCPRO 35 - Manual (Page 9)

ON/OFF LAMP
RESET
FILM OPEN ADJUST CLOSE
MODE
min. 100 mm min. 3.9"
min. 300 mm min. 11.8"
min. 100 mm
min. 3.9"
min. 300 mm
min. 11.8"
LOCPRO 35
min. 500 mm
min. 19.7"
9
4. Unpacking
and Installation
In order to prevent condensation from forming on individual
components, the LOCPRO 35 should be kept in its packing
an additional day (before unpacking), if the temperatures
during shipping (cold) vary extremely from those tempe-
ratures in the installation area (warm).
1) Cut off the packing straps.
2) Lift off the packing in an upward direction.
3) Take out the additional items (User Manual, projection
lamp, accessories, maintenance kit).
4) Remove the plastic foil.
5) Always transport the projector to its destination in its
shipping or projection case and lock caster lock levers.
Note: Optimum wall projection of 2300 mm (6.6ft) is
reached when the LOCPRO 35 is installed in such
a way that there is a distance of 4 m (12 ft) bet-
ween the back of the unit and the projection wall.
Unpacking and Installation