ARRI LOCPRO 35 - Manual (Page 6)

6
• Make sure the LOCPRO 35 stands securely and do not
block the air vents of the HTI lamp cooling fan on the
bottom side! See
➪ photo page 9.
• Keep all inflammable material away from the air vents
of the HTI lamp cooling fan.
see
➪ photo page 9.
• For sufficient air cooling, it is essential that the air
supply and escape vents on the sides are not blocked.
see
➪ photo page 9.
• Disconnect the unit from the mains before starting
maintenance or service!
• The unit is to be opened only by a qualified electrical
specialist. If fuses need to be replaced, ensure that
only the values indicated are used. See chapter 7.4.
• Repairs should be made by authorized service tech-
nicians only!
• Use only original replacement parts and accessories!
• Follow the maintenance instructions in this user manual.
• Follow the shipping and storing instructions.
Important Notes
• In humid weather please take the usual and customary
safety measures.
• In case of poor picture steadiness check the film guide for
possible contamination, such as e.g. splicing residues
or emulsion deposits.Clean if necessary! (see chapter 7.1)
• Optical surfaces should only be cleaned with an optic
cleaning brush. To remove sticky emulsion deposits, please
use an optic tissue, moistened with pure alcohol.
• Do not use solvents for cleaning!
• Do not loosen the paint-secured screws!
Product Identification
Please always refer to the model type and unit serial number
when ordering spare parts or requesting information.
Explanation of the Symbols
➪ photo refers to objects identified by pictures, photos
or graphs.
Safety