ARRI LOCPRO 35 - Manual (Page 45)

45
7. Service
and Maintenance
To preserve optimum projection and image quality, it is
essential to check the brightness and image quality every
six months and, if necessary, during such a maintenance
service the LOCPRO 35 should be adjusted to meet
factory quality standards.(see ”Service Manual”).
Make sure that the LOCPRO 35 is switched off
and completely disconnected from the mains
before starting service or maintenance work.
Unplug all interface connections.
7.1 Cleaning the Film Track
Never use hard or metallic objects for cleaning.
We recommend using the ARRI Plastic Film
Track cleaning Skewer, Id.No. K5.26167.0 or
maintenance tool kit incl. Cleaning kit, Id.No.
M2.81126.0. Both items can be ordered.
1) Press the snap locks ➪ photo on the lamp cover and
remove lamp cover.
Ser
vice and Maintenance
snap locks lamp cover