ARRI LOCPRO 35 - Manual (Page 13)

13
5.3 Format masks
The standard aperture size of 18.6 x 24 mm can be
adapted to the various projection formats by using format
masks.
The following masks are available:
Type ........................................................... Ident No.
Film Gate Mask Set (13 masks incl. case) . M2.81853.0
Mask 1:1.37 ACAD ............................... M2.81876.0
Mask 1:1.66 WIDE SCREEN ................... M2.81877.0
Mask 1:1.85 WIDE SCREEN ................... M2.81878.0
Mask 1:2.35 SUPER 35 .......................... M2.81885.0
Mask 1:1.85 SUPER 35 ......................... M2.81882.0
Mask 1:1.78 HDTV S35 ......................... M2.81881.0
Mask 1:1,78 HDTV ................................ M2.81879.0
Mask 1:1.66 SUPER 35 .......................... M2.81880.0
Mask 1:1.33 TV-ISO .............................. M2.81875.0
Mask 1:2.35 S 35 ABOVE ...................... M2.81886.0
Mask 1:1.85 S 35 5 VERS ...................... M2.81883.0
Mask 1:1.8 S 35 5.7 VERS. .................... M2.81884.0
Mask 1:1.78 SUPER 35 HDTV –3-PERF: ... M2.81908.0
Initial Operation
hood control knobs
4 screws
“Film“-key
5.3.1 Exchanging the film gate
format mask:
Insert format mask:
• Open the film channel with ”Film” – key
• Switch off the main power supply.
• Remove optics cover.
Remove the control knobs and the 4 screws with an
Allen key SW3. See Chapter 7.2 (# 2)