ARRI LOCPRO 35 - Manual (Page 39)

39
6.7.5 ”Lamp” Key
• The HTI-Lamp is ignited by pressing the ”Lamp” key
➪ photo .
• The HTI lamp is switched off by pressing the ”Lamp”
key again (5 seconds waiting time after switch-on).
6.7.6 ”Reset” Key
• The ”Reset” Key ➪ photo resets the frame counter to ”0”.
• The ”Reset” Key is also used for settings described in
section 6.6.
Functions
“lamp“- key
“reset“- key