ARRI LOCPRO 35 - Manual (Page 48)

48
7.3 Shipping and Storage
1) Put shipping safety label onto right film plate and
screw in shipping safety screw while the film channel
is open.
2) The LOCPRO 35 should only be stored or transported
in the upright position and in its original packing.
7.4 Replacing the Fuses
Before replacing blown fuses, first eliminate the cause.
See Annex - Trouble Shooting List
Before replacing fuses, the LOCPRO 35 must be
completely disconnected from the mains.
Follow the safety and warning instructions in
the user manual.
When lifting off the optic cover do not damage
BNC and S-VHS plug.
The main fuses located in the main power socket are
accessible from the outside.
screw driver
Ser
vice and Maintenance