ARRI LOCPRO 35 - Manual (Page 8)

8
• Excellent image quality with flicker-free projection:
Best possible image brightness, excellent picture steadi-
ness and image quality are the outstanding features of
the LOCPRO 35. The 400 W HTI lamp allows optimum
projection of more than 6 ft (2 m) image width and an
average color temperature of 5.400
° K.
The built-in video camera (optional) can be connected
to a monitor, video recorder or video printer. Two video
outputs are available, FBAS (BNC) and Y/C. In addition,
it is possible to mask the video image electronically to
match the different film formats as required.
• Telecine Mode (Pulldown Mode):
Flicker-free transfer onto video tape at 24, 25 or 30 fps
is possible depending on the integrated video system -
50 Hz PAL or 60 Hz NTSC. In both cases, the integrated
video camera synchronizes frame transport.
• Sound Synchronization:
To synchronize DAT-players an LTC signal (timecode)
output is available. In connection with an ASU, a
biphase signal (synchronized picture change signal with
forward/reverse recognition) allows for synchronization
of perfotape players. For the adaption to different
perfotape players it is possible to program on the ASU
the pulses per picture and the max. acceleration.
The LOCPRO 35 is available in the following versions:
• LOCPRO 35 St 230V/50Hz. ...... Id.No. M1.83000.0
• LOCPRO 35 St 115V/60Hz. ...... Id.No. M1.83000.A
• LOCPRO 35 TV 230V/50Hz. ..... Id.No. M1.83000.B
with integrated CCD video camera (PAL)
• LOCPRO 35 TV 115V/60Hz. ..... Id.No. M1.83000.C
with integrated CCD video camera (NTSC)
General Product Infor
mation