Cine mode, Pal-video camera, Revolving shutter – ARRI LOCPRO 35 User Manual
Page 30: Video, Operation, Operation switching on/off, Synchronization, Functions, 2 video operation
30
6.5.2 Video operation
The video camera can only be switched on and off when
the film is not being transported.
When the video camera in the LOCPRO 35 is switched on,
the revolving shutter and consequently, film transport are
automatically synchronized by the video signal of the
video camera.
In this case, the revolving shutter of the LOCPRO 35 runs
at 50 fps (PAL) or 59.94 fps (NTSC).
Cine Mode 48/48 is not suitable for video. The video
camera can be switched on, however, it is not in sync
with the LOCPRO 35.
The film transport speed depends on the position of the
Master Control Knob and the setting in the ”mode” menu
(see table).
PAL Video Camera
Menu
Video
filmtransport in fps (master control knob position)
Standard
50
25
12.5
6.25
3.12
1.56
48/48
off
48
24
12
6
3
1.5
48/48
on
not to be used (asynchronous)
50/50
off
on
50
25
12.5
6.25
3.125
1.5625
24/50
off
on
50
24
12.5
6.25
3.125
1.5625
30/50
off
on
50
30
12.5
6.25
3.125
1.5625
Functions