ARRI LOCPRO 35 - Manual (Page 46)

46
2) Pull off the control knobs ➪ photo upward.
3) Remove all four screws ➪ photo with hex. Wrench
SW3 and lift off optics’ cover completely.
Attention:
Do not damage BNC and S-VHS plug and
make sure that there is no cable connected to
the BNC or S-VHS plug!
4) Remove emulsion deposits and possible adhesive
residues from film track ➪ photo , deflection runner 1
and 2 ➪ photo and loop box left.
5) Replace lamp cover.
6) Replace optic cover
7) Replace control knobs and fasten optic cover with the
screws.
Ser
vice and Maintenance
optic cover control knobs
4 screws
lamp cover
loop box
deflection
runner 1
filmtrack
deflection
runner 2