Konica Minolta FK-102 - Manual (Page 102)

Reception Recording - (continued)
3-13
0
Reception Mode
Auto Reception
(FAX Only
Mode)
Manual Reception
(Telephone Only
Mode)
When Unable to
Receive
Memory
Substitute
Reception
Reception
Recording
Reception
Information
3
Reception
•
If the size of the paper on which the facsimile actually prints is smaller than that of the
paper selected at step 1, the document is printed in reduced size.
•
If the direction of the paper on which the facsimile actually prints is different with that of
the paper selected at step 1, the document is automatically printed in a state of rotated by
a 90-degree angle.
•
If you print mixed size documents, this process is executed on each page.
•
The paper sizes selected in step 1 and step 2 are set in several paper trays, the paper tray
used is selected according to the setting of the automatic paper size selection function.
Refer to the "User's Manual (Copy Edition)" for more detailed information.
•
If the required paper size is only set in the manual insertion tray, the document is printed
on the paper fed from the tray; however, if the automatic paper size selection function or
the automatic tray selection function is disabled on the tray, the tray is not selected.
•
If 2 in 1 reception is set, 8.5 x 11 paper is selected when 5.5 x 8.5 paper is received, and
11 x 17 paper is selected when 8.5 x 11 paper is received.
•
Even if the page division is set to ON, the page will not be divided if the transmission/
reception mode is set as follows.
•
[Rx feed tray (fix)] is set
•
[minimum reduction rate] is 100%
•
[2 sided reception] is set to [ON]
•
[2 in 1 print] is set to [ON]
•
If no printable paper is set, a message asking you to set the printable paper appears.
•
If [Rx Paper selection] is set to [Priority]:
The appropriate paper is selected among 8.5 x 11, 8.5 x 14 and 11 x 17. If it is not
available, it is recorded after being reduced to fit in closest size of paper.
•
If [Rx Paper selection] is set to [Fix]:
The appropriate paper is selected among 8.5 x 11, 8.5 x 14 and 11 x 17. If it is not
available, the message stays appearing until the paper is loaded.
•
If [Rx feed tray (fix)] is set to other than [Auto]:
It is recorded to fit in the size of the paper in the paper tray (except manual insertion
tray) that is set in [Rx feed tray (fix)].
•
If [Rx Paper selection] is set to other than [Auto] and [Rx feed tray (fix)] is set to other
than [Auto]:
The setting in the [Rx feed tray (fix)] takes precedence.
FOR DETAILS