Konica Minolta FK-102 - Manual (Page 62)

Operation During Transmission - (continued)
2-24
When Unable to Send
When Unable to Send
When you are unable to send a FAX, an error message is displayed on the screen. Press
[STOP/CLEAR] on the control panel to clear the error message.
Redialing
Redialing refers to dialing the number of the same remote station again.
In case the facsimile cannot be sent due to a busy signal from the receiving machine or for
some other reason, the machine redials the number after a predetermined amount of time
has elapsed. During that interval before the number is redialed, the transmission docu-
ment is treated as a reserved document waiting for dialing.
After the time of purchase, the redialing function is set to redial one time after a three-minute
interval. The number of redials and the redialing interval can be changed in the Key Operator
mode. For details, see "Line Parameter Set" (p. 10-20).
Error Message Corrective Action
Transmission error
For details, see "Cannot Send Messages" (p.
Appendix-4).
FOR DETAILS