Konica Minolta FK-102 - Manual (Page 37)

1-12
FAX Basic screen
The FAX Basic screen is displayed when the FAX button is pressed on the control panel. The FAX
Basic screen contains Telbook, Key pad and Setting.
When the ECM is set to function with the FAX mode, “Enter E.C.M. password” is displayed
on the FAX basic screen. In this case, the ECM manages the number of originals sent.
For the details, refer to “Section 11 Key Operator Mode ECM On/Off Setting” on copier
User’s Manual.
Message indicator ............ Displays a condition of the copier or a message showing operat-
ing procedures.
Remote Station indicator .. Displays an input remote station.
JOB LIST.......................... Displays a list of reserved documents. You can redial manually
from this screen.
Stations ............................ Displays the number of input remote stations.
MEMORY ......................... Displays remainder of memory used for the fax operation.
Off hook............................ Press when you want to transmit/receive a fax manually. When
you press this key, a signal noise is heard from the speaker.
SCAN ............................... Pressed if:
• You want to scan a multi-page document using the original
document glass.
• You want to scan a document using both the RADF and the
original document glass.
• You want to scan large document or a document for which the
size is different.
FOR DETAILS