Konica Minolta FK-102 - Manual (Page 92)

3-3
0
Reception Mode
Auto Reception
(FAX Only
Mode)
Manual Reception
(Telephone Only
Mode)
When Unable to
Receive
Memory
Substitute
Reception
Reception
Recording
Reception
Information
3
Reception
Auto Reception (FAX Only Mode)
When using the telephone line for fax use only, select this mode. When the set number of rings
are detected, fax messages are received automatically. During reception, the word [Receiving] is
displayed in the screen message area.
This mode is activated when Receive mode (Auto/Man) is set to Auto Rx in Line parameter set
of Key Operator mode.
•
Refer to "Line Parameter Set" (p. 10-20) on setting this mode.
•
Refer to "Line Parameter Set" (p. 10-20) for information about setting the number of rings
before reception.
HINTS
Starts receiving messages automatically
Arrival of a call
Received
Document