Konica Minolta FK-102 - Manual (Page 137)

6-26
Upside down
The Top/bottom correction function allows you to specify the appropriate binding style when
transmitting a two-sided document (i.e., when pages are printed on both sides). The binding style
you select will allow the pages of a two-sided document to be read appropriately by binding right
to left or top to bottom.
>>> Specifications for Upside down <<<
The RADF must be used. The platen glass cannot be used for transmission in Top/bottom
correction mode.
Functions incompatible with Upside down
2 in 1 Tx, Book Tx, Mixed original, Long original, Polling Rx, Bulletin board polling Rx
1.
Press [FAX] on the control panel to view the FAX Basic
screen, if it is not already displayed.
2.
Press [APPLICATION] on the control panel.
3.
Press Upside down.