Konica Minolta FK-102 - Manual (Page 36)

1-11
0
Use of Control
Panel
First-Use
Settings
Useful functions
Wake-up
Screen
FAX Basic
screen
1
Before Use
Wake-up Screen
The wake-up screen shown below is displayed when the auxiliary power switch is turned on after
the main power switch has been turned on. The copy basic screen is displayed.
•
When returning from the auto shutoff mode, the basic screen of the turned off mode is
displayed.
•
When returning to an operation by pressing a key on the control panel, the wake-up
screen is displayed.
•
When recycling the power, the screen that was showing when the power was switched off
will reappear.
•
When turning off and on the main power, turn on it after the POWER SAVER ON/OFF
LED goes off. It may operate abnormally if you turn on it before the LED goes off.
•
Since the copier’s memory is used for fax Tx / Rx, the Copy Basic screen displays the
memory status during fax Tx / Rx.
Wake-up Screen Copy Basic screen
FOR DETAILS