Konica Minolta FK-102 - Manual (Page 94)

3-5
0
Reception Mode
Auto Reception
(FAX Only
Mode)
Manual Reception
(Telephone Only
Mode)
When Unable to
Receive
Memory
Substitute
Reception
Reception
Recording
Reception
Information
3
Reception
When Unable to Receive
When you cannot receive faxes, the following error message is displayed. Take corrective actions
by referring to the Appendix-6 (Error Message Displayed). Press [STOP/CLEAR] to clear the
error message display.
•
If an external telephone continues to ring, Receive mode (Auto/Man) may be set to Man-
ual Rx in FAX initial settings of Key Operator mode.
This must be set to Auto Rx to receive documents automatically. For details, see "Line
Parameter Set" (p. 10-20).
•
Documents may also not be able to be received because memory is full. In addition,
check that there is paper in the paper tray.
Error Message Corrective Action
Reception error For details, see "Cannot Receive Messages"
(p. Appendix-5).
FOR DETAILS