Konica Minolta FK-102 - Manual (Page 149)

6-38
V34 OFF
V34 is a communication mode used to communicate with the Super G3 FAX. When a remote sta-
tion or the FK-102 is connected to a line by way of extension exchange equipment, you may not
be able to communicate with the super G3 mode depending on line conditions.
In such a case, we recommend that you transmit by selecting V34 OFF to set the super G3 mode
off.
>>> Specifications for V34 OFF <<<
The V34 mode will be resumed automatically on completion of transmission.
Functions incompatible with V34 OFF
Bulletin entry
1.
Press [FAX] on the control panel to view the FAX Basic
screen if it is not already displayed.
2.
Press [APPLICATION] on the control panel.
3.
Press .
4.
Press V34 OFF.
To exit, press CANCEL or press V34 OFF again.
5.
Press OK.
The FAX Basic screen will be restored.
6.
Set other functions if necessary.
See "Setting Transmission Conditions" (p. 2-10) for setting functions on the FAX Basic
screen. See "Application functions overview" (p. 6-4) for setting functions on the FAX Appli-
cation Menu screen.
7.
Designate the remote station.
See "Selecting a Remote Station" (p. 2-13) for designating the remote station.
FOR DETAILS
FOR DETAILS
FOR DETAILS