Konica Minolta FK-102 - Manual (Page 99)

Reception Recording - (continued)
3-10
The rules by which the best paper size is determined are as follows.
Step1 Selecting the appropriate paper
The machine decides the appropriate paper size in view of the width and length according to
the following rule.
*1
: If "5.5 x 8.5" is appropriate, select "5.5 x 8.5R" which is the only possible length to set to the
machine body.
Step2 Selecting the paper on which the facsimile actually prints the docu-
ment
The machine checks whether the appropriate paper selected at step 1 is set in the machine.
• The paper is set ....................................The machine starts recording.
• The paper is not set or the
automatic tray selection function
on the tray is disabled ...........................The machine looks for the second appropriate
paper in order as shown in the table on the next
page. If Page Division is set to ON in the Key
Operator mode, the facsimile looks for paper to
record the document on more than one paper.
Width of the received
document
Length of the received document
A4 (216 mm)
143 mm or less 144 - 293 mm 294 - 375 mm 375 mm or more
5.5 x 8.5
*1 8.5 x 11R 8.5 x 14 11 x 17
B4 (256 mm)
225 mm or less 294 mm or more
8.5 x 11 11 x 17
A3 (304 mm)
225 mm or less 225 mm or more
8.5 x 11 11 x 17