Konica Minolta FK-102 - Manual (Page 266)

Function Set - (continued)
10-44
This feature is cancelled when:
•
You press the power switch ON;
•
The power is switched back ON because a printer job is given; or
•
The power is switched back ON by the weekly timer function.
When any of those three events occurs during the print inhibit time, printing job starts in suc-
cession.
Until any of those three events occurs, the OFF mode print set feature continues.
Example: If the start time is set to 8:00 p.m., and the end time to 8:30 a.m.:
1. When switching the power OFF and ON manually
2. When the power is automatically switched OFF and ON under the
weekly timer function
*The power is switched back ON during any of the previously mentioned conditions.
FOR DETAILS
8:00pm
Power switched OFF
Preset print inhibit time
Power switched back
ON
8:30am 9:00am
Batch print starts
Preset print inhibit time
*Power switched back ON
*Power switched
back ON
Batch print starts
*Power switched
back ON
Batch print starts
8:00pm
Power switched OFF 8:30am
(A) (B)