Konica Minolta FK-102 - Manual (Page 153)

6-42
Relay Transmission Request
Relay transmission request is the bridging of transmissions to several remote stations via an
intermediate (relay) station. If the remote stations to which you intend to transmit are very far, this
function allows cutting down the communication costs. You can organize groups of stations, each
of which consists of one relay station and several remote stations.
>>> Specifications for Relay Tx Req <<<
• Relay Tx Req can be used only when the Relay Tx Req feature is enabled in the Key
Operator mode. For details, see "Function Set" (p. 10-32).
• We define the originating station as that which issues a relay request, the relay station
as that which relays transmissions, and the terminating stations as that which receive
and terminate communications.
• To use Relay Tx Req, a Relay Box No., relay password and destination group No. must
be defined in the relay station.
• When you intend to use your FK-102 as a relay station, define the Relay Box No., relay
password and destination group No. of your station and give the information defined to
the originating station. For details, see "Setting relayed transmission" (p. 9-27).
• Relay Tx Req can be used only when the relay station incorporates the F-code feature.
Functions incompatible with Relay Tx Req
Polled Tx, Polling Rx, Confiden.Tx, Bulletin, ID Tx
Original station
Toll call
Intermediate relay station
Local call
Terminating station
Terminating station