Konica Minolta FK-102 - Manual (Page 142)

6-31
Opening the
Application
Screen
Application
functions
overview
2 in 1
Transmission
Book
Transmission
Frame erase
Transmission
Original size set
Mixed original
Z folded original
Long original
Upside down
ECM off
Confidential
communication
V34 OFF
ID
Transmission
Relay
Transmission
Request
One-touch/
Program
6
Transmission
Applications
Confidential communication
Confidential communication is a function that allows you to use Restricted access boxes (similar
to email accounts) to exchange private information with specific people. Not only can you send a
document to a restricted access box of a remote station (Restricted access transmission) but you
can receive a document in a restricted access box of your station (Restricted access reception).
The following sections describe the procedures for Restricted access transmission, printing the
document received in a Restricted access box, and deleting the document held in a Restricted
access box.
>>> Specifications for Confidential.Tx <<<
• Restricted access communication is enabled by the appropriate Key Operator setting.
For details, see "Function Set" (p. 10-32).
• Restricted access transmission requires that the remote station receiving the transmis-
sion has a Restricted access box and password defined for that station’s FAX machine.
The password may not be needed, depending on the FAX machine.
• If you intend to perform Restricted access reception, define a Restricted access box and
password (see "Setting the confidential boxes" (p. 9-33)) for your FK-102 and give this
information to the receiving station.
Confidential.Tx can be used only when the remote station (FAX) with which you communi-
cate incorporates the F-code feature.
Functions incompatible with Confiden.Tx
Polled Tx, Polling Rx, Bulletin, Relay Tx Req, ID Tx
Sender Receiver
Confidential box