Konica Minolta FK-102 - Manual (Page 49)

Setting Transmission Conditions - (continued)
2-11
0
Simple FAX
Transmission
Placing the
Original on the
Machine
Setting
Transmission
Conditions
Selecting a
Remote Station
Operation
During
Scanning
Operation
During
Transmission
Reserving
Transmission
Manual
Transmission
Canceling
Transmission
Confirming
Reserved
Documents
Confirming
Communica-
tion Results
Memory
Transmissions
Total page set
Timer
Transmission
International
Communication
Sender
Information
2
Transmission
•
As originals are scanned with increasing fineness, the amount of data that is sent also
increases, and more time is required for transmission.
•
When S-Fine has been selected and the receiving machine is not equipped with an S-
Fine mode, originals are sent at a resolution corresponding to the reception capability of
the receiving machine.
(3) Quality
Set Quality according to the contents of the original. There are three types of Quality set-
tings. Text is set at the time of purchase.
• Photo........................................ Press this when scanning originals containing photo-
graphs only.
• Text/Photo ............................... Press this when scanning originals containing both text
and photographs.
• Text........................................... Press this when scanning originals containing text only.
(4) Density
Set Density according to the density of the original. There are four types of Density settings.
Auto is set at the time of purchase.
• Auto.......................................... This activates the automatic density adjustment function
so that density is set automatically.
• DARKER................................... Press to scan originals so that they are darker than the
density set with Auto.
• NORMAL .................................. Press to scan originals at a density that is between
DARKER and LIGHTER.
• LIGHTER .................................. Press to scan originals so that they are lighter than the
density set with Auto.
This setting activates the automatic density adjustment function so that originals are
scanned at the proper density. Press LIGHTER or DARKER to select density that is lighter or
darker than density selected in Auto mode.
FOR DETAILS
FOR DETAILS