Konica Minolta FK-102 - Manual (Page 282)

11-8
Transmission Report
Manual Printout
The following appears at the transmission if ON is selected at [Report output set]-[Tx result
report select] by the Key Operator mode.
Press YES to print the Tx result report. Press NO to not print the report. For details, see
"Report Output set" (p. 10-27).
Automatic Printout
Automatic printout can be set to ON or OFF with [Tx reservation report] at [Report output set]
of Key Operator mode. For details, see "Report Output set" (p. 10-27).
REMOTE STATION: .....The following is shown.
Remote station name when remote station name is registered in
abbreviated dialing; and, telephone number of remote station.
START:.........................The time at which communication started is shown.
TIME: ...........................The required time for the communication is shown.