Konica Minolta FK-102 - Manual (Page 260)

Function Set - (continued)
10-38
Setting up retransmission
The retransmission function can be enabled or disabled. If enabled, you may retransmit docu-
ments held in memory that failed to transmit (even after redialing attempts) perhaps due to a
communication error, but held in memory for a certain length of time. You can designate a des-
tination that is not the same as the one you designated in the earlier transmission attempts.
• File Re-Tx
: ON/OFF*
• File keep time
: 12*/24/48/72 hours
* indicates factory default setting.
If retransmission is enabled, the document held in memory for later retransmission will be
marked Re-Tx in JOB LIST.
1.
Open the FAX Key Operator Mode (See "Entering Key Opera-
tor" (p. 10-2)).
2.
Press Function Set.
FOR DETAILS