Philips Robot de cocina - Manual (Page 17)

ENGLISH 17
Solution
Turn the bowl/or lid clockwise until you hear a click.
Make sure that the points on the bowl and on the lid
are placed directly opposite each other.
The automatic thermal cut-out system has probably cut
off the power supply to the appliance because it has
overheated. 1) Unplug the appliance. 2) Press the STOP
button. 3) Let the appliance cool down for 60 minutes.
4) Put the mains plug in the socket. 5) Switch the
appliance on again.
Press the button for the process you want.
This appliance is equipped with a memory-function. If
you restart the appliance within 40 seconds, the process
will start where it was interrupted. If you want the
process to start right from the beginning: 1) Briefly press
another process (e.g. the pulse button) 2) Then press
the STOP button. 3) Press the appropriate process
button to make the process start all over again.
If both the blender and the food-processing bowl have
been mounted correctly, only the blender will function. If
you want to use the food-processing bowl, detach the
blender and close the fixing hole with the screw cap.
The motor is already at its physical limit, i.e. at kneading
or when the speed is at the defined level where it can
not be decreased any further.
Problem
The appliance doesn't
switch on.
The appliance has
suddenly stopped
running.
You have pressed the
wrong process button.
The process doesn't
start at the beginning
after a restart.
Both the blender jar
and the food
processing bowl are
attached, but only the
blender works.
The +/- button does
not react at certain
applications.
Troubleshooting guide
Application times
10 - 60 sec.
10 - 60 sec.
10 - 60 sec.
60 - 180 sec.
30 - 180 sec.
10 - 60 sec.
depends on the
quantity
depends on the
quantity
Application
Chopping, pureeing, mixing
Shredding, grating
Slicing
Kneading, mixing
Whisking, whipping, emulsifying
Blending, pureeing
Pressing of citrus fruits
Extracting of fruit juices and
vegetable juices
Accessory
P
h j k
¬
{
˚
D
ƒ
©
Function
¥
^
^
¨
∆
†
“
‘
Functions, appliacations & application times