Philips Robot de cocina - Manual (Page 6)

ENGLISH 6
Parts and accessories
A Motor unit
B Smart process control panel
C Built-in safety lock
D Screw cap (must be placed to use bowl
functions)
E Food processing bowl
F Tool holder
G Blender jar
H Lid of blender jar
I Peg of lid (activates and deactivates the safety
switch)
J Lid of food processing bowl
K Stopper
L Feed tube
M Pusher
N Sieve of citrus press
O Cone of ccitrus press
P Juice extractor drum
Q Juice extractor pulp sieve
R Lid of juice extractor
S Pusher of juice extractor
T Metal blade + protective cover
U Kneading hook
V Balloon beater
W Shredding insert medium
X Shredding insert fine
Y Shredding insert coarse
Z Granulating insert
a Insert holder
b Adjustable slicing disc (slicing insert, carrier and
adjusting knob)
Introduction
This appliance is equipped with an automatic
thermal cut-out system.This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1 Pull the mains plug out of the socket.
2 Let the appliance cool down for
60 minutes.
3 Put the mains plug in the socket.
4 Switch the appliance on again.
Please contact your Philips dealer or an
authorised Philips service centre if the automatic
thermal cut-out system is activated too often.
CAUTION: In order to avoid a hazardous
situation, this appliance must never be connected
to a timer switch.
Important
◗ Read these instructions for use carefully and
look at the illustrations before using the
appliance.
◗ Keep these instructions for use for future
reference.