ElmoMC SimplIQ Digital Servo Drives-Harmonica Installation Guide - Manual (Page 15)

Harmonica Installation Guide Installation
MAN-HARIG (Ver. 1.902)
www.elmomc.com
15
Component Connector Described
in Section
Drawing
Main feedback cable J3 3.5.5.1
Auxiliary power cable J4 3.5.4
Digital input cable (if needed) J5 3.5.5.3.a
Digital output cable (if needed) J6 3.5.5.3.b
Analog input cable (if needed) J7 3.5.5.3.c
Main power cable J8 3.5.2.2
Motor cable J8 3.5.2.2
PC for drive setup and tuning