EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 106)

106 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
9.8.2 BINARY OUTPUTS
Main menu || TEST || BINARY OUTPUTS ||
This function displays the state of the binary outputs for all AS-i slaves.
The binary outputs can be modified after selecting an AS-i slave.
9.8.3 ANALOG INPUTS
Main menu || TEST || ANALOG INPUTS ||
The slave types are characterized as follows:
The data of the B slaves starts at channel 2!
The order in which information is displayed is as follows:
•
AS-i slave address
• decimal 16-bit value
• bar graph
If the selected slave is a transparent slave, the value is always displayed without
sign. If the selected slave is a transparent slave, the value is always displayed
without sign. In this case, when the value is changed only positive values can be
entered. Additionally, a value overflow is indicated by "Overfl".
BINARY OUTPUTS
D3...D0
1A - 0 1 0 1
2A - 0 1 0 1
3A - 0 0 0 1
⇓
0: Output cleared
1: Output set
ANALOG INPUTS
1 X
2 A
3 B
X: Single Slave
A: A-Slave
B: B-Slave
AB: A+B Slave
...