EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 113)

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 113
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
9.9.8 LOS (list of offline slaves)
Main menu || SETUP || LOS LIST OF OFFLINE SLAVES ||
See also <Advanced Diagnostics for AS-i Masters>.
By using "Clear all" and "Set all" all bits in this list can be delete or set, respective-
ly, at the same time. Below this is a list of all slaves that can be selected individu-
ally in order to set or delete the LOS bit.
9.9.9 CHIPCARD
Main menu || SETUP || CHIPCARD ||
This function is used to send unsafe AS-i data between the master and chip card.
In addition, the unsafe section of the chip card can be deleted.
For additional information refer to chap. <Chip card>.
LOS LIST OF
OFFLINE SLAVES
CLEAR ALL
SET ALL
| 1A- X
2A- | 3A-
4A-X | 5A- X
....
30A-X | 31A-
| 1B- X
2B- X | 3B- X
4B- X | 5B- X
....
30B- X | 31B- X
Empty field: LOS bit deleted
X: LOS bit set
CHIPCARD
CARD -> MASTER
MASTER -> CARD
CLEAR CHIPCARD
CHIPCARD->MASTER: Chip card data are copied to the Monitor
MASTER->CHIPCARD: Monitor data are copied to the chip card
CLEAR CHIPCARD: Chip card data are cleared