EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 86)

86 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Using this menu you can delete the safe configuration from a chip card bank. This
procedure is PIN protected.
9.5.8 PROTECT (protect safe configuration)
Main Menu|| AS-I SAFETY || PROTECT ||
This function allows you to protect the safe configuration before downloading
over the serial interface.
9.5.9 SAFETY SUBST VAL (Substitute values for input data from safe slaves)
Main menu || AS-I SAFETY || SAFETY SUBST VAL ||
When working with a double master (AS-i master and two AS-i circuits) the AS-i
circuit must be selected first by using the arrow and the OK buttons.
This function enables activation/deactivation of the code substitute function for
safe slaves.
SUBSTITUTE (values)
STOP MONITOR
OK
START MONITOR
OK
PROTECT
ENTER PIN
0000
OK
AS-I CIRCUIT 1
AS-I CIRCUIT 2
SAFE SUBST VAL
SUBSTITUTE
CHANGE