Lenze E94AYFLF Digital frequency module - Manual (Page 21)

EDS94AYFLF EN 3.2 - 10/2010
L
21
Digital frequency extension module | Parameter setting & configuration
Digital frequency output
Terminal assignment X10
3 Digital frequency output
The optionally available digital frequency extension module serves to extend the L-force
9400 Servo Drive by a digital frequency input and a digital frequency output.
 The digital frequency output X10 serves to output encoder signals with TTL level
(0 ... 500 kHz).
3.1 Terminal assignment X10
Pin Signal
1 B
2 A
3 A
4 +5 V (±6 %)
5 GND
6 Z
7 Z
8 Enable
9 B