Lenze E94AYFLF Digital frequency module User Manual
Page 30
Digital frequency extension module | Parameter setting & configuration
Digital frequency output
System block "LS_DigitalFrequencyOutput"
30
L
EDS94AYFLF EN 3.2 - 10/2010
Outputs
Output
Data type
Value/meaning
DFOUT_dnActualPos_p
DINT
Current position as signed 32-bit value in [increments]
For software versions prior to V3.0:
• A virtual revolution is resolved to 16 bits.
For software version V3.0 or higher:
• If valid machine parameters are applied to the input DFOUT_AxisData, a virtual
revolution is resolved with the encoder resolution specified in the machine
parameters.
• If the input DFOUT_AxisData remains unused, a virtual revolution is resolved
with the setting under C00100 (Lenze setting: 16 bits).
DFOUT_dnActualSpeed_s
DINT
Current speed in [rpm]
Problem description - speed variations ( 28)
DFOUT_bOutputFreqLimited
BOOL
Status signal "Frequency to be output is limited"
TRUE The frequency to be output is limited by the value set in