RKI Instruments RM-5000 Series Indicator/Alarm Unit - Manual (Page 13)

3 Product Components 3-3. Names and functions for each part
- 13 - RM-5000
<Attaching or Detaching Battery Unit>
Attach or detach the indicator/alarm unit from the single-unit case or multi-unit case according to the
following procedure.
(1) Attaching procedure
• Open the front cover of the indicator/alarm unit.
• Make sure that the power switch of the indicator/alarm unit is OFF.
• Insert the indicator/alarm unit along the rail into the single-unit case or multi-unit case.
• Push it in until an click is heard and you feel that it is locked in.
• Gently pull it to make sure that the indicator/alarm unit does not come off.
• Close the front cover of the indicator/alarm unit.
(2) Detaching procedure
• Open the front cover of the indicator/alarm unit.
• Make sure that the power switch of the indicator/alarm unit is OFF.
• While pressing the lock lever on the lower right of the indicator/alarm unit, hold the front cover and
pull it out of the case.
• Close the front cover of the indicator/alarm unit.
Front cover
Press
the lock lever upward.
CAUTION
Turn off the power of the indicator/alarm unit before attaching or detaching it. Otherwise, a failure
may be caused.
CAUTION
This is a precision device. Be careful not to drop it when detaching it. Dropping the unit
compromises its original performance or causes malfunctions.