RKI Instruments RM-5000 Series Indicator/Alarm Unit - Manual (Page 35)

5 How to Operate 5-4. Modes
- 35 - RM-5000
SE 6 Alarm bar display setting (ALM BAR)
SE 7 Double range external output setting (DR OUT)
SE 8 Low flow rate setting (FLOW SET)
SE 9 External output setting (OUT SET)
SE10 RS-485 communication setting (485 PTRN)
SE11 Green LED brightness adjustment (GRN ADJ)
SE12 Red LED brightness adjustment (RED ADJ)
SE13 Orange LED brightness adjustment (ORNG ADJ)
Fault Detailed View 2-8 FAULT Not used.
HART Device
Synchronization Setting 2-9 HART SYN Not used.
HART Device Setting 2-10 HART
SET Not used.
Return to the user mode 2-11 U MODE Return to the user mode.
Factory Mode Switching 2-12 F MODE Not used.
NOTE
Operations are slightly different depending on the model. Key operations are disabled for the key switches
of operation menus not available for the model.