RKI Instruments RM-5000 Series Indicator/Alarm Unit - Manual (Page 32)

5 How to Operate 5-2. Basic operating procedures
RM-5000 - 32 -
5-2. Basic operating procedures
Normally, the detection mode is used for normal operations. (The detection mode is activated after the
power is turned on.)
During maintenance
During inhibit
Lamp on
Lamp off
Lamp blinking
<<Detection Mode>>
The indicator/alarm unit
is restarted after
recovering from fault.
<<Gas Alarm Status>>
<<Maintenance Mode (user mode)>>
MODE
(long pressing)
<<Fault Alarm Status>>
<<Gas Alarm Test Mode>>
TEST
(long pressing)
MODE
(long pressing)
<<Maintenance Mode (regular maintenance mode)>>
WARNING
When the indicator/alarm unit enters each mode from the detection mode while an alarm is
activated, the alarm contact is released.