RKI Instruments RM-5000 Series Indicator/Alarm Unit - Manual (Page 20)

4 How to Use 4-4. How to install
RM-5000 - 20 -
When installed in one row vertically and N columns horizontally
<Attaching procedure>
After drilling holes in the panel to install a single-unit case, attach the indicator/alarm unit according to the
following procedure.
(1) Insert the single-unit case from the rear terminal plate side to the panel front side.
(2) Set fixing bracket on the upper and lower parts of the single-unit case.
(3) Tighten the screws of the fixing bracket.
Multi-point panel cutout
dimensions
Panel thickness
N: Buzzer unit + Indicator/alarm unit
CAUTION
• Tightening the screws to a high torque may deform the case or damage the fixing bracket.
• Turn off the power of the indicator/alarm unit before attaching or detaching it. Otherwise, a failure
may be caused.